目录一.Logical Volume Manager(逻辑卷管理)概述1.什么是LVM2.LVM相关术语3.LVM的优缺点二.LVM实战案例1.环境准备2.对磁盘分区2.1 对/dev/sdc进行分区2.2 对/dev/sde进行分区2.3 检查磁盘分区情况3.创建pv3.1 查看现有的pv列表3.2 创建pv3.3 再次查看pv列表4.创建vg4.1 查看现有的vg列表4.2 创建vg4.3 再次查看vg列表5.创建lv5.1 查看现有的lv列表5.2 创建lv5.3 再次查看lv列表6.格式化lv设备6.1 查看lv的设备存储路径6.2 格式化lv设备7.挂载lv设备7.1 创建挂载点7.2 挂载lv设备7.3 查看lv设备挂载信息三.LVM扩展案例1.扩展lv案例1.1 扩容到指定大小ext4案例1.2 剩余空间全部扩容xfs案例2.扩展vg案例2.1 实验环境准备2.2 扩容vg案例3.移除现有的vg3.1 卸载设备3.2 移除vg列表等待所有lv3.3 移除所有的vg
一.Logical Volume Manager(逻辑卷管理)概述
1.什么是LVM
LVM是Logical Volume Manager(逻辑卷管理)的简写，它是Linux环境下对磁盘分区进行管理的一种机制。
它由Heinz Mauelshagen在Linux 2.4内核上实现，最新版本为：稳定版1.0.5，开发版 1.1.0-rc2，以及LVM2开发版。
我们学习的Ceph底层就用到了LVM技术栈。
还有一个经典的使用场景就是默认的根分区不够用时，就可以使用lvm技术进行扩容啦~
2.LVM相关术语
物理存储介质(PhysicalStorageMedia):
指系统的物理存储设备：磁盘(/dev/hda，/dev/sda)或者分区(/dev/sdb1，/dev/sdb2)等，是存储系统最底层的存储单元。
物理卷(Physical Volume，PV):
指磁盘分区或从逻辑上与磁盘分区具有同样功能的设备(如RAID)，是LVM的基本存储逻辑块。
卷组(Volume Group，VG):
类似于非LVM系统中的物理磁盘，其由一个或多个物理卷PV组成。可以在卷组上创建一个或多个LV（逻辑卷）。
逻辑卷(Logical Volume，LV):
类似于非LVM系统中的磁盘分区，逻辑卷建立在卷组VG之上。
在逻辑卷LV之上可以建立文件系统（比如/home或者/usr等）。
物理块(Physical Extent，PE):
PE是物理卷PV的基本划分单元，具有唯一编号的PE是可以被LVM寻址的最小单元。
PE的大小是可配置的，默认为4MB。所以物理卷（PV）由大小等同的基本单元PE组成。
逻辑块（Logical Extent，LE）
逻辑卷LV也被划分为可被寻址的基本单位，称为LE。在同一个卷组中，LE的大小和PE是相同的，并且一一对应。
3.LVM的优缺点
优点:
- 1.文件系统可以跨多个磁盘，因此文件系统大小不会受物理磁盘的限制;
- 2.可以在系统运行的状态下动态的扩展文件系统的大小;
- 3.可以增加新的磁盘到LVM的存储池中;
- 4.可以以镜像的方式冗余重要的数据到多个物理磁盘;
- 5.可以方便的导出整个卷组到另外一台机器;
缺点:
- 1.在从卷组中移除一个磁盘的时候必须使用reducevg命令(这个命令要求root权限，并且不允许在快照卷组中使用);
- 2.当卷组(VG)中的一个磁盘损坏时，整个卷组都会受到影响;
- 3.因为加入了额外的操作，存贮性能受到影响;
二.LVM实战案例
1.环境准备
如上图所示，我添加了4块物理设备用来模拟测试LVM案例。
2.对磁盘分区
2.1 对/dev/sdc进行分区
[root@master231 ~]# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.37.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x5823985b.
Command (m for help): p
Disk /dev/sdc: 300 GiB, 322122547200 bytes, 629145600 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x5823985b
Command (m for help): g
Created a new GPT disklabel (GUID: E02AD7BC-1CDC-234C-9FC5-90A2BAE08330).
Command (m for help): n
Partition number (1-128, default 1):
First sector (2048-629145566, default 2048):
Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-629145566, default 629145566): +100G
Created a new partition 1 of type 'Linux filesystem' and of size 100 GiB.
Command (m for help): n
Partition number (2-128, default 2):
First sector (209717248-629145566, default 209717248):
Last sector, +/-sectors or +/-size{K,M,G,T,P} (209717248-629145566, default 629145566):
Created a new partition 2 of type 'Linux filesystem' and of size 200 GiB.
Command (m for help): p
Disk /dev/sdc: 300 GiB, 322122547200 bytes, 629145600 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E02AD7BC-1CDC-234C-9FC5-90A2BAE08330
Device Start End Sectors Size Type
/dev/sdc1 2048 209717247 209715200 100G Linux filesystem
/dev/sdc2 209717248 629145566 419428319 200G Linux filesystem
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
[root@master231 ~]#
[root@master231 ~]# fdisk -l /dev/sdc
Disk /dev/sdc: 300 GiB, 322122547200 bytes, 629145600 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E02AD7BC-1CDC-234C-9FC5-90A2BAE08330
Device Start End Sectors Size Type
/dev/sdc1 2048 209717247 209715200 100G Linux filesystem
/dev/sdc2 209717248 629145566 419428319 200G Linux filesystem
[root@master231 ~]#
2.2 对/dev/sde进行分区
[root@master231 ~]# fdisk /dev/sde
Welcome to fdisk (util-linux 2.37.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x2ac167b3.
Command (m for help): p
Disk /dev/sde: 1 TiB, 1099511627776 bytes, 2147483648 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x2ac167b3
Command (m for help): g
Created a new GPT disklabel (GUID: EF74D46C-5A58-CD49-858F-88ACCD891DFB).
Command (m for help): n
Partition number (1-128, default 1):
First sector (2048-2147483614, default 2048):
Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2147483614, default 2147483614): +500G
Created a new partition 1 of type 'Linux filesystem' and of size 500 GiB.
Command (m for help): n
Partition number (2-128, default 2):
First sector (1048578048-2147483614, default 1048578048):
Last sector, +/-sectors or +/-size{K,M,G,T,P} (1048578048-2147483614, default 2147483614):
Created a new partition 2 of type 'Linux filesystem' and of size 524 GiB.
Command (m for help): p
Disk /dev/sde: 1 TiB, 1099511627776 bytes, 2147483648 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: EF74D46C-5A58-CD49-858F-88ACCD891DFB
Device Start End Sectors Size Type
/dev/sde1 2048 1048578047 1048576000 500G Linux filesystem
/dev/sde2 1048578048 2147483614 1098905567 524G Linux filesystem
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
[root@master231 ~]#
[root@master231 ~]# fdisk -l /dev/sde
Disk /dev/sde: 1 TiB, 1099511627776 bytes, 2147483648 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: EF74D46C-5A58-CD49-858F-88ACCD891DFB
Device Start End Sectors Size Type
/dev/sde1 2048 1048578047 1048576000 500G Linux filesystem
/dev/sde2 1048578048 2147483614 1098905567 524G Linux filesystem
[root@master231 ~]#
2.3 检查磁盘分区情况
[root@master231 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
loop0 7:0 0 64M 1 loop /snap/core20/2379
loop1 7:1 0 63.7M 1 loop /snap/core20/2434
loop2 7:2 0 87M 1 loop /snap/lxd/29351
loop3 7:3 0 89.4M 1 loop /snap/lxd/31333
loop4 7:4 0 38.8M 1 loop /snap/snapd/21759
loop5 7:5 0 44.3M 1 loop /snap/snapd/23258
sda 8:0 0 100G 0 disk
├─sda1 8:1 0 1M 0 part
├─sda2 8:2 0 2G 0 part /boot
└─sda3 8:3 0 98G 0 part
└─ubuntu--vg-ubuntu--lv 253:0 0 49G 0 lvm /
sdb 8:16 0 100G 0 disk
sdc 8:32 0 300G 0 disk
├─sdc1 8:33 0 100G 0 part
└─sdc2 8:34 0 200G 0 part
sdd 8:48 0 500G 0 disk
sde 8:64 0 1T 0 disk
├─sde1 8:65 0 500G 0 part
└─sde2 8:66 0 524G 0 part
sr0 11:0 1 1024M 0 rom
[root@master231 ~]#
3.创建pv
3.1 查看现有的pv列表
[root@master231 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 ubuntu-vg lvm2 a-- <98.00g 49.00g
[root@master231 ~]#
3.2 创建pv
[root@master231 ~]# pvcreate /dev/sdb /dev/sdc{1,2} /dev/sdd /dev/sde{1,2}
Physical volume "/dev/sdb" successfully created.
Physical volume "/dev/sdc1" successfully created.
Physical volume "/dev/sdc2" successfully created.
Physical volume "/dev/sdd" successfully created.
Physical volume "/dev/sde1" successfully created.
Physical volume "/dev/sde2" successfully created.
[root@master231 ~]#
3.3 再次查看pv列表
[root@master231 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 ubuntu-vg lvm2 a-- <98.00g 49.00g
/dev/sdb lvm2 --- 100.00g 100.00g
/dev/sdc1 lvm2 --- 100.00g 100.00g
/dev/sdc2 lvm2 --- <200.00g <200.00g
/dev/sdd lvm2 --- 500.00g 500.00g
/dev/sde1 lvm2 --- 500.00g 500.00g
/dev/sde2 lvm2 --- <524.00g <524.00g
[root@master231 ~]#
4.创建vg
4.1 查看现有的vg列表
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
[root@master231 ~]#
4.2 创建vg
[root@master231 ~]# vgcreate vg01 /dev/sdb /dev/sdc1 /dev/sdc2
Volume group "vg01" successfully created
[root@master231 ~]#
[root@master231 ~]# vgcreate vg02 /dev/sdd /dev/sde1 /dev/sde2
Volume group "vg02" successfully created
[root@master231 ~]#
4.3 再次查看vg列表
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 0 0 wz--n- <399.99g <399.99g
vg02 3 0 0 wz--n- <1.49t <1.49t
[root@master231 ~]#
5.创建lv
5.1 查看现有的lv列表
[root@master231 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
ubuntu-lv ubuntu-vg -wi-ao---- <49.00g
[root@master231 ~]#
5.2 创建lv
[root@master231 ~]# lvcreate vg01 --name lv01 --size 50G
Logical volume "lv01" created.
[root@master231 ~]#
[root@master231 ~]# lvcreate vg01 --name lv02 --size 100G
Logical volume "lv02" created.
[root@master231 ~]#
[root@master231 ~]# lvcreate vg02 --name lv03 --size 20G
Logical volume "lv03" created.
[root@master231 ~]#
[root@master231 ~]# lvcreate vg02 --name lv04 --size 50G
Logical volume "lv04" created.
[root@master231 ~]#
温馨提示:
上述案例是从不同的vg中创建lv案例。
5.3 再次查看lv列表
[root@master231 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 ubuntu-vg lvm2 a-- <98.00g 49.00g
/dev/sdb vg01 lvm2 a-- <100.00g <50.00g
/dev/sdc1 vg01 lvm2 a-- <100.00g <100.00g
/dev/sdc2 vg01 lvm2 a-- <200.00g <100.00g
/dev/sdd vg02 lvm2 a-- <500.00g <430.00g
/dev/sde1 vg02 lvm2 a-- <500.00g <500.00g
/dev/sde2 vg02 lvm2 a-- <524.00g <524.00g
[root@master231 ~]#
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 2 0 wz--n- <399.99g <249.99g
vg02 3 2 0 wz--n- <1.49t <1.42t
[root@master231 ~]#
[root@master231 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
ubuntu-lv ubuntu-vg -wi-ao---- <49.00g
lv01 vg01 -wi-a----- 50.00g
lv02 vg01 -wi-a----- 100.00g
lv03 vg02 -wi-a----- 20.00g
lv04 vg02 -wi-a----- 50.00g
[root@master231 ~]#
6.格式化lv设备
6.1 查看lv的设备存储路径
[root@master231 ~]# ll /dev/vg01/
total 0
drwxr-xr-x 2 root root 80 Dec 9 11:31 ./
drwxr-xr-x 22 root root 4460 Dec 9 10:22 ../
lrwxrwxrwx 1 root root 7 Dec 9 11:31 lv01 -> ../dm-1
lrwxrwxrwx 1 root root 7 Dec 9 10:21 lv02 -> ../dm-2
[root@master231 ~]#
[root@master231 ~]# ll /dev/vg02/
total 0
drwxr-xr-x 2 root root 80 Dec 9 10:22 ./
drwxr-xr-x 22 root root 4460 Dec 9 10:22 ../
lrwxrwxrwx 1 root root 7 Dec 9 10:22 lv03 -> ../dm-3
lrwxrwxrwx 1 root root 7 Dec 9 10:22 lv04 -> ../dm-4
[root@master231 ~]#
[root@master231 ~]#
[root@master231 ~]# ll /dev/mapper/
total 0
drwxr-xr-x 2 root root 160 Dec 9 11:31 ./
drwxr-xr-x 22 root root 4460 Dec 9 10:22 ../
crw------- 1 root root 10, 236 Dec 9 10:14 control
lrwxrwxrwx 1 root root 7 Dec 9 10:14 ubuntu--vg-ubuntu--lv -> ../dm-0
lrwxrwxrwx 1 root root 7 Dec 9 11:31 vg01-lv01 -> ../dm-1
lrwxrwxrwx 1 root root 7 Dec 9 10:21 vg01-lv02 -> ../dm-2
lrwxrwxrwx 1 root root 7 Dec 9 10:22 vg02-lv03 -> ../dm-3
lrwxrwxrwx 1 root root 7 Dec 9 10:22 vg02-lv04 -> ../dm-4
[root@master231 ~]#
6.2 格式化lv设备
1.格式化为ext4文件系统
[root@master231 ~]# mkfs.ext4 /dev/vg01/lv01
mke2fs 1.46.5 (30-Dec-2021)
Creating filesystem with 13107200 4k blocks and 3276800 inodes
Filesystem UUID: 013455e2-b3a2-4c56-b820-b55b9fc93fc8
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424
Allocating group tables: done
Writing inode tables: done
Creating journal (65536 blocks): done
Writing superblocks and filesystem accounting information: done
[root@master231 ~]#
2.格式化为ntfs文件系统（速度较慢）
[root@master231 ~]# mkfs.ntfs /dev/vg01/lv02
Cluster size has been automatically set to 4096 bytes.
Initializing device with zeroes: 100% - Done.
Creating NTFS volume structures.
mkntfs completed successfully. Have a nice day.
[root@master231 ~]#
3.格式化为fat件系统
[root@master231 ~]# mkfs.fat /dev/vg02/lv03
mkfs.fat 4.2 (2021-01-31)
[root@master231 ~]#
4.格式化为xfs文件系统
[root@master231 ~]# mkfs.xfs /dev/vg02/lv04
meta-data=/dev/vg02/lv04 isize=512 agcount=4, agsize=3276800 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0 inobtcount=0
data = bsize=4096 blocks=13107200, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=6400, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@master231 ~]#
7.挂载lv设备
7.1 创建挂载点
[root@master231 ~]# mkdir -pv /yinzhengjie/fs/{ext4,ntfs,fat,xfs}
7.2 挂载lv设备
[root@master231 ~]# mount /dev/vg01/lv01 /yinzhengjie/fs/ext4/
[root@master231 ~]# mount /dev/vg01/lv02 /yinzhengjie/fs/ntfs/
[root@master231 ~]# mount /dev/vg02/lv03 /yinzhengjie/fs/fat/
[root@master231 ~]# mount /dev/vg02/lv04 /yinzhengjie/fs/xfs/
[root@master231 ~]#
7.3 查看lv设备挂载信息
[root@master231 ~]# mount | grep yinzhengjie
/dev/mapper/vg01-lv01 on /yinzhengjie/fs/ext4 type ext4 (rw,relatime)
/dev/mapper/vg01-lv02 on /yinzhengjie/fs/ntfs type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/mapper/vg02-lv03 on /yinzhengjie/fs/fat type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/mapper/vg02-lv04 on /yinzhengjie/fs/xfs type xfs (rw,relatime,attr2,inode64,logbufs=8,logbsize=32k,noquota)
[root@master231 ~]#
[root@master231 ~]# df -h | grep yinzhengjie
/dev/mapper/vg01-lv01 49G 24K 47G 1% /yinzhengjie/fs/ext4
/dev/mapper/vg01-lv02 100G 68M 100G 1% /yinzhengjie/fs/ntfs
/dev/mapper/vg02-lv03 20G 16K 20G 1% /yinzhengjie/fs/fat
/dev/mapper/vg02-lv04 50G 390M 50G 1% /yinzhengjie/fs/xfs
[root@master231 ~]#
三.LVM扩展案例
1.扩展lv案例
1.1 扩容到指定大小ext4案例
1.扩容前查看
[root@master231 ~]# df -h | grep yinzhengjie
/dev/mapper/vg01-lv01 49G 24K 47G 1% /yinzhengjie/fs/ext4
/dev/mapper/vg01-lv02 100G 68M 100G 1% /yinzhengjie/fs/ntfs
/dev/mapper/vg02-lv03 20G 16K 20G 1% /yinzhengjie/fs/fat
/dev/mapper/vg02-lv04 50G 390M 50G 1% /yinzhengjie/fs/xfs
[root@master231 ~]#
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 2 0 wz--n- <399.99g <249.99g
vg02 3 2 0 wz--n- <1.49t <1.42t
[root@master231 ~]#
2.开始扩容
[root@master231 ~]# lvextend /dev/mapper/vg01-lv01 --size 150G
Size of logical volume vg01/lv01 changed from 50.00 GiB (12800 extents) to 150.00 GiB (38400 extents).
Logical volume vg01/lv01 successfully resized.
[root@master231 ~]#
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 2 0 wz--n- <399.99g <149.99g # vg01的确少了100Gi
vg02 3 2 0 wz--n- <1.49t <1.42t
[root@master231 ~]#
[root@master231 ~]#
[root@master231 ~]# df -h | grep yinzhengjie
/dev/mapper/vg01-lv01 49G 24K 47G 1% /yinzhengjie/fs/ext4 # 但是挂载并没有刷新
/dev/mapper/vg01-lv02 100G 68M 100G 1% /yinzhengjie/fs/ntfs
/dev/mapper/vg02-lv03 20G 16K 20G 1% /yinzhengjie/fs/fat
/dev/mapper/vg02-lv04 50G 390M 50G 1% /yinzhengjie/fs/xfs
[root@master231 ~]#
[root@master231 ~]# fdisk -l /dev/mapper/vg01-lv01 # 查看设备大小已经扩容成功了
Disk /dev/mapper/vg01-lv01: 150 GiB, 161061273600 bytes, 314572800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[root@master231 ~]#
3.使用resize2fs工具刷新最新的挂载表
[root@master231 ~]# resize2fs /dev/mapper/vg01-lv01
resize2fs 1.46.5 (30-Dec-2021)
Filesystem at /dev/mapper/vg01-lv01 is mounted on /yinzhengjie/fs/ext4; on-line resizing required
old_desc_blocks = 7, new_desc_blocks = 19
The filesystem on /dev/mapper/vg01-lv01 is now 39321600 (4k) blocks long.
[root@master231 ~]#
[root@master231 ~]# df -h | grep yinzhengjie
/dev/mapper/vg01-lv01 148G 24K 141G 1% /yinzhengjie/fs/ext4 # Duang~很明显刷新成功啦！
/dev/mapper/vg01-lv02 100G 68M 100G 1% /yinzhengjie/fs/ntfs
/dev/mapper/vg02-lv03 20G 16K 20G 1% /yinzhengjie/fs/fat
/dev/mapper/vg02-lv04 50G 390M 50G 1% /yinzhengjie/fs/xfs
[root@master231 ~]#
1.2 剩余空间全部扩容xfs案例
1.扩容前查看
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 2 0 wz--n- <399.99g <149.99g
vg02 3 2 0 wz--n- <1.49t <1.42t
[root@master231 ~]#
2.将vg剩余的所有空间扩容到指定的lv
[root@master231 ~]# lvextend /dev/mapper/vg02-lv04 -l +100%FREE
Size of logical volume vg02/lv04 changed from 50.00 GiB (12800 extents) to <1.47 TiB (385021 extents).
Logical volume vg02/lv04 successfully resized.
[root@master231 ~]#
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 2 0 wz--n- <399.99g <149.99g
vg02 3 2 0 wz--n- <1.49t 0 # 很明显，vg已经全部使用完了
[root@master231 ~]#
[root@master231 ~]# fdisk -l /dev/mapper/vg02-lv04
Disk /dev/mapper/vg02-lv04: 1.47 TiB, 1614895120384 bytes, 3154092032 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[root@master231 ~]#
3.自动扩展XFS文件系统到最大的可用大小
[root@master231 ~]# df -h | grep yinzhengjie
/dev/mapper/vg01-lv01 148G 24K 141G 1% /yinzhengjie/fs/ext4
/dev/mapper/vg02-lv03 20G 16K 20G 1% /yinzhengjie/fs/fat
/dev/mapper/vg02-lv04 50G 390M 50G 1% /yinzhengjie/fs/xfs # 注意，挂载的大小并没有变化！
/dev/mapper/vg01-lv02 100G 68M 100G 1% /yinzhengjie/fs/ntfs
[root@master231 ~]#
[root@master231 ~]# xfs_growfs /yinzhengjie/fs/xfs/
meta-data=/dev/mapper/vg02-lv04 isize=512 agcount=4, agsize=3276800 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0 inobtcount=0
data = bsize=4096 blocks=13107200, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=6400, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 13107200 to 394261504
[root@master231 ~]#
[root@master231 ~]# df -h | grep yinzhengjie
/dev/mapper/vg01-lv01 148G 24K 141G 1% /yinzhengjie/fs/ext4
/dev/mapper/vg02-lv03 20G 16K 20G 1% /yinzhengjie/fs/fat
/dev/mapper/vg02-lv04 1.5T 11G 1.5T 1% /yinzhengjie/fs/xfs # Duang~成功啦！
/dev/mapper/vg01-lv02 100G 68M 100G 1% /yinzhengjie/fs/ntfs
[root@master231 ~]#
[root@master231 ~]#
2.扩展vg案例
2.1 实验环境准备
如上图所示，我新增了2个1TB的硬盘。
2.2 扩容vg案例
1.查看现有的vg列表
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 2 0 wz--n- <399.99g <149.99g
vg02 3 2 0 wz--n- <1.49t 0
[root@master231 ~]#
2.创建pv
[root@master231 ~]# pvcreate /dev/sdf /dev/sdg
Physical volume "/dev/sdf" successfully created.
Physical volume "/dev/sdg" successfully created.
[root@master231 ~]#
3.将pv加入到vg中
[root@master231 ~]# vgextend vg02 /dev/sdf /dev/sdg
Volume group "vg02" successfully extended
[root@master231 ~]#
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 2 0 wz--n- <399.99g <149.99g
vg02 5 2 0 wz--n- <3.49t <2.00t # Duang~扩容成功啦！
[root@master231 ~]#
3.移除现有的vg
3.1 卸载设备
[root@master231 ~]# umount /yinzhengjie/fs/ext4/
[root@master231 ~]# umount /yinzhengjie/fs/fat/
[root@master231 ~]# umount /yinzhengjie/fs/ntfs/
[root@master231 ~]# umount /yinzhengjie/fs/xfs/
[root@master231 ~]# df -h | grep yinzhengjie
[root@master231 ~]#
3.2 移除vg列表等待所有lv
[root@master231 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
ubuntu-lv ubuntu-vg -wi-ao---- <49.00g
lv01 vg01 -wi-a----- 150.00g
lv02 vg01 -wi-a----- <249.99g
lv03 vg02 -wi-a----- 20.00g
lv04 vg02 -wi-a----- <1.47t
[root@master231 ~]#
[root@master231 ~]# lvremove vg01 --force
Logical volume "lv01" successfully removed
Logical volume "lv02" successfully removed
[root@master231 ~]#
[root@master231 ~]# lvremove vg02 --force
Logical volume "lv03" successfully removed
Logical volume "lv04" successfully removed
[root@master231 ~]#
[root@master231 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
ubuntu-lv ubuntu-vg -wi-ao---- <49.00g
[root@master231 ~]#
3.3 移除所有的vg
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
vg01 3 0 0 wz--n- <399.99g <399.99g
vg02 5 0 0 wz--n- <3.49t <3.49t
[root@master231 ~]#
[root@master231 ~]# vgremove vg01
Volume group "vg01" successfully removed
[root@master231 ~]#
[root@master231 ~]# vgremove vg02
Volume group "vg02" successfully removed
[root@master231 ~]#
[root@master231 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
ubuntu-vg 1 1 0 wz--n- <98.00g 49.00g
[root@master231 ~]#